Part Number Hot Search : 
BPC150 DS3231MZ EL911107 SR103 M37713 T1608 SOT23 ADG619
Product Description
Full Text Search
 

To Download FMM5716X Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 FMM5716X
60GHz Low Noise Amplifier
FEATURES *Low Noise Figure :NF = 5 dB (Typ.) @ f = 60 GHz *High Associated Gain: |S21| = 22 dB(Typ) @ f = 60 GHz *Wide Frequency Band : 57 - 64 GHz *Impedance Matched Zin/Zout = 50 DESCRIPTION The FMM5716X is a low noise amplifier MMIC designed for applications in the 57-64 GHz frequency range. This product is well suited for wireless LAN and point-to-point radio. Eudyna's stringent Quality Assurance Program assures the highest reliability and consistent performance.
Device photo
ABSOLUTE MAXIMUM RATING (Case Temperature Tc=25 C) Item Symbol Rating
DC Input Voltage DC Input Voltage Input Power Storage Temperature VDD VGG Pin Tstg +4 -3 3 -55 to +125
o
o
Unit
V V dBm o C
RECOMMENDED OPERATING CONDITION (Case Temperature Tc=25 C) Item Symbol Condition
DC Input Voltage Backside Temperature VDD TB 3 -45 to +85
o
Unit
o
V C
ELECTRICAL CHARACTERISTICS (Case Temperature Tc=25 C) Limit Item Symbol Condition Min. Typ. Max.
Noise Figure Linear Gain Output Power at 1dB G.C.P. Gate Voltage Input Return Loss Output Return Loss NF |S21| P1dB V GG |S11| |S22| V DD = 3V IDD = 30 mA f = 57~64 GHz 16 -0.3 5 22 10 -0.1 10 10 7 0 -
Unit
dB dB dBm mA dB dB
These values are representative for CW on chip measurements that are made without bonding wires at the RF ports.
ESD
Class 0
~ 199V
Note : Based on EIAJ ED-4701 C-111A(C=100pF, R=1.5k)
Edition 1.1 Dec. 2005
1
FMM5716X
60GHz Low Noise Amplifier
Noise Figure vs. Frequency Bias Conditions: VDD = 3V
7 6.5 N o is e F ig u re (d B ) 6 5.5 5
IDD = 30 mA
Linear Gain vs. Frequency Bias Conditions: VDD = 3V
30 28 26 24 |S 2 1 | (d B )
IDD = 30 mA IDD = 40 mA
IDD = 20 mA
22 20 18 16 14 12 10
IDD = 20 mA
4.5 4 50
IDD = 40 mA
55
60 Frequency (GHz)
65
70
50
55
60 Frequency (GHz)
65
70
Input Return Loss vs. Frequency Bias Conditions: VDD = 3V
0
IDD = 40 mA
Output Return Loss vs. Frequency Bias Conditions: VDD = 3V
0 -5 -10 -15 -20
IDD = 20 mA IDD = 40 mA
IDD = 30 mA
-5 |S 1 1 | (d B )
|S 2 2 | (d B )
IDD = 30 mA IDD = 20 mA
-10 -15 -20 -25 50 55 60 Frequency (GHz) 65 70
-25 50 55 60 Frequency (GHz) 65 70
Typical on chip measurements 2
FMM5716X
60GHz Low Noise Amplifier
Output Power vs. Frequency Bias Conditions: VDD = 3V, IDD = 30 mA
12 10 8 P o u t (d B m ) 6 4
Pin = -16 dBm Pin = -8 dBm
P1dB
Pin = -10 dBm Pin = -12 dBm Pin = -14 dBm
2
Pin = -18 dBm
0 54 56 58 60 62 64 66 68 Freq (GHz)
Typical on chip measurements
3
FMM5716X
60GHz Low Noise Amplifier
S-PARAMETERS Bias Conditions: VDD = 3V, IDD = 30 mA
30 20 10
0
S11
-5 |S 1 1 |, |S 2 2 | (d B )
S22
0 |S 2 1 | (d B ) -10 -20 -30 -40 -50 -60 0 20 40 60 80 100 Frequency (GHz)
-10 -15 -20 -25 0 20 40 60 80 100 Frequency (GHz)
Typical on chip measurements 4
FMM5716X
60GHz Low Noise Amplifier
S-PARAMETERS Bias Conditions: VDD = 3V, IDD = 30 mA
Freq. GHz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 S11 MAG 0.988 0.977 0.963 0.954 0.948 0.944 0.940 0.937 0.936 0.935 0.933 0.929 0.925 0.926 0.926 0.920 0.919 0.918 0.916 0.911 0.912 0.922 0.916 0.916 0.916 0.914 0.910 0.904 0.897 0.886 0.872 0.862 0.852 0.841 0.826 0.816 0.806 0.796 0.789 0.780 0.775 0.769 0.765 0.765 0.759 0.759 0.755 0.724 0.653 0.498 S21 MAG 0.028 0.021 0.030 0.057 0.103 0.126 0.123 0.098 0.075 0.060 0.050 0.043 0.038 0.034 0.031 0.027 0.025 0.020 0.018 0.015 0.013 0.008 0.006 0.002 0.002 0.001 0.002 0.004 0.009 0.019 0.034 0.058 0.089 0.132 0.185 0.251 0.328 0.420 0.528 0.657 0.819 1.014 1.269 1.614 2.075 2.746 3.706 5.086 7.004 9.055 S12 MAG 0.00004 0.00003 0.00016 0.00035 0.00052 0.00058 0.00036 0.00015 0.00022 0.00033 0.00027 0.00022 0.00023 0.00033 0.00043 0.00081 0.00101 0.00053 0.00174 0.00081 0.00072 0.00084 0.00131 0.00135 0.00186 0.00157 0.00066 0.00025 0.00093 0.00088 0.00096 0.00172 0.00189 0.00150 0.00114 0.00133 0.00046 0.00098 0.00051 0.00122 0.00191 0.00209 0.00193 0.00160 0.00132 0.00070 0.00111 0.00246 0.00326 0.00515 S22 MAG 0.995 0.996 0.987 0.941 0.796 0.736 0.726 0.726 0.725 0.717 0.704 0.690 0.676 0.664 0.652 0.641 0.631 0.606 0.592 0.592 0.588 0.584 0.581 0.577 0.574 0.566 0.559 0.557 0.553 0.549 0.539 0.529 0.516 0.502 0.488 0.478 0.471 0.464 0.462 0.463 0.465 0.471 0.475 0.484 0.489 0.496 0.497 0.493 0.478 0.436 Freq. ANG GHz -12.7 51 -25.9 52 -39.9 53 -55.8 54 -68.2 55 -72.4 56 -78.9 57 -86.5 58 -95.1 59 -103.9 60 -112.5 61 -120.7 62 -128.6 63 -136.3 64 -143.9 65 -151.5 66 -159.3 67 -167.6 68 -173.1 69 179.7 70 171.8 71 163.6 72 155.5 73 146.8 74 137.8 75 128.1 76 118.7 77 108.5 78 97.4 79 86.5 80 75.2 81 63.4 82 51.8 83 40.7 84 30.3 85 20.4 86 11.2 87 2.4 88 -5.8 89 -13.7 90 -21.2 91 -28.5 92 -35.5 93 -42.8 94 -50.1 95 -57.5 96 -65.2 97 -73.9 98 -83.1 99 -92.5 100 S11 MAG ANG 0.311 -79.701 0.257 -51.9 0.337 -41.8 0.412 -47.5 0.468 -55.2 0.497 -65.7 0.514 -78.3 0.509 -92.8 0.472 -110.7 0.382 -136.2 0.233 -174.4 0.108 115.7 0.163 32.1 0.242 4.0 0.303 -11.1 0.350 -21.4 0.384 -27.9 0.412 -34.0 0.442 -37.3 0.476 -40.6 0.517 -43.2 0.565 -46.9 0.613 -50.6 0.665 -55.6 0.715 -61.3 0.750 -66.8 0.778 -73.5 0.789 -78.8 0.796 -84.5 0.791 -89.0 0.779 -94.4 0.773 -98.0 0.754 -101.9 0.729 -104.4 0.718 -107.5 0.687 -109.3 0.697 -110.5 0.679 -110.8 0.685 -111.8 0.681 -113.8 0.691 -113.9 0.692 -115.6 0.704 -116.6 0.710 -118.9 0.706 -120.0 0.726 -121.9 0.742 -124.0 0.740 -126.1 0.749 -126.5 0.743 -129.0 S21 MAG ANG 10.300 -156.080 10.297 173.6 9.951 149.6 9.812 128.5 9.951 110.3 10.467 92.1 11.400 73.7 12.799 53.5 14.461 30.9 15.904 4.2 16.381 -25.9 15.339 -54.7 13.432 -81.4 11.636 -103.5 10.083 -122.6 8.836 -140.5 7.878 -157.6 7.102 -173.5 6.532 170.8 6.036 155.2 5.601 138.7 5.192 123.5 4.924 107.1 4.639 90.4 4.227 74.7 3.898 58.6 3.608 42.1 3.245 26.5 2.961 10.1 2.671 -5.0 2.389 -20.7 2.147 -36.0 1.925 -51.3 1.690 -66.1 1.501 -80.4 1.305 -94.9 1.149 -108.4 0.996 -122.7 0.870 -136.7 0.730 -150.4 0.639 -161.1 0.544 -172.6 0.451 175.7 0.397 164.9 0.346 152.3 0.297 142.3 0.253 132.2 0.209 123.5 0.188 115.2 0.153 99.9 S12 MAG 0.00512 0.00603 0.00516 0.00461 0.00654 0.00692 0.00766 0.00852 0.01061 0.01285 0.01563 0.01601 0.01587 0.01679 0.01444 0.01386 0.01350 0.01280 0.01292 0.01259 0.01148 0.01026 0.00950 0.01027 0.00856 0.00740 0.00638 0.00477 0.00377 0.00380 0.00406 0.00375 0.00430 0.00224 0.00340 0.00370 0.00206 0.00636 0.00288 0.00459 0.00908 0.01079 0.01433 0.01459 0.01214 0.01322 0.01379 0.00798 0.01061 0.01638 S22 MAG ANG 0.383 -97.256 0.352 -98.0 0.343 -100.0 0.331 -106.4 0.313 -112.8 0.279 -121.9 0.229 -134.0 0.152 -149.2 0.054 160.6 0.117 32.7 0.275 1.3 0.404 -23.1 0.484 -41.1 0.517 -56.2 0.526 -66.2 0.510 -73.9 0.505 -80.1 0.492 -84.0 0.470 -86.8 0.461 -88.3 0.452 -88.1 0.452 -87.9 0.469 -87.8 0.487 -86.9 0.506 -87.5 0.537 -88.9 0.567 -90.4 0.589 -92.4 0.620 -95.3 0.643 -98.0 0.664 -100.8 0.675 -104.0 0.688 -107.1 0.703 -109.5 0.710 -111.8 0.723 -114.2 0.740 -116.6 0.747 -119.3 0.758 -122.0 0.760 -125.0 0.761 -127.0 0.758 -129.6 0.758 -131.6 0.766 -133.4 0.762 -135.8 0.763 -137.5 0.764 -140.1 0.765 -141.2 0.766 -142.5 0.776 -144.7
ANG -10.3 -20.2 -29.5 -38.4 -47.2 -55.9 -64.5 -72.9 -81.3 -89.5 -97.7 -105.7 -113.4 -121.1 -128.7 -136.4 -143.7 -151.1 -158.7 -166.0 -173.4 179.1 171.4 164.1 156.1 148.1 140.0 131.9 123.5 115.1 106.7 98.0 89.8 81.0 72.3 63.8 55.3 46.9 38.5 30.0 21.5 13.1 4.7 -3.8 -13.0 -22.8 -33.6 -46.9 -63.0 -78.4
ANG -137.9 166.3 127.2 73.0 -3.1 -75.1 -135.3 179.2 149.7 128.4 112.0 97.9 84.8 73.1 62.5 51.5 41.0 21.9 25.5 9.0 1.8 -11.6 -7.7 -17.2 31.6 85.7 -134.1 -146.1 -138.8 -151.9 -163.4 -176.5 170.0 153.8 136.5 120.4 104.2 87.9 72.2 57.1 42.4 28.5 14.3 0.3 -14.3 -29.5 -46.9 -67.5 -92.6 -123.2
ANG 3.9 112.6 72.2 24.2 -30.7 -85.6 -124.9 -146.4 -120.2 -165.8 -171.9 -171.5 -29.8 -89.8 -135.7 -134.8 -173.6 165.0 158.8 122.2 125.1 156.0 129.0 133.2 102.1 74.5 9.0 136.4 120.8 130.0 116.4 108.1 116.7 78.1 65.9 63.1 -148.2 88.8 106.9 144.6 106.9 109.5 93.2 70.3 40.5 -171.5 157.6 142.3 121.9 94.5
ANG 73.721 33.6 21.3 -2.0 -12.5 -39.5 -59.3 -77.8 -92.0 -125.1 -144.6 -170.5 165.6 143.2 130.1 118.8 106.2 97.7 94.7 74.0 66.5 55.5 48.8 37.9 28.7 33.7 26.2 17.6 25.0 22.0 42.0 45.8 48.5 30.4 72.2 66.8 85.3 57.9 108.5 80.7 93.4 85.2 64.9 67.0 54.8 27.8 28.6 32.2 24.5 21.8
Typical on chip measurements
5
FMM5716X
60GHz Low Noise Amplifier
CHIP OUTLINE VDD1 VDD2 VDD3
RFin
RFout
VGG1
VGG2
VGG3
Bonding Pad Locations (Dimension in Micron Meters)
590
470
120 0 0 80 510 830 Pad Dimensions DC Pads; 80 x 80 m RF Pads; 80 x 60 m 6 1280 1460
Unit; m Chip size; 1540 x 710 m Chip Thickness; 70 m
FMM5716X
60GHz Low Noise Amplifier
Assembly Diagram To DC Power Supply (VDD) Single Layer Capacitor 100 pF
RF In Z0 = 50
*1
*1
RF Out Z0 = 50
*2 Single Layer Capacitor 100 pF *1; RF Wire Length = 150 m *2; DC Wire Length 1000 m To DC Power Supply (VGG)
MTTF vs. Backside Temperature
1.E+12 1.E+11 Ea=1.02eV 1.E+10 MTTF (hrs) 1.E+09 1.E+08 1.E+07 1.E+06 1.E+05 20 40 60 80 100 120 140 160 180 BacksideTemperature (degC)
7
FMM5716X
60GHz Low Noise Amplifier
DIE ATTACH 1) The die-attach station must have accurate temperature control, and an inert forming gas should be used. 2)Chips should be kept at room temperature except during die-attach. 3) Place package or carrier on the heated stage. 4) Lightly grasp the chip edges by the longer side using tweezers. Die attach conditions Stage Temperature : 300 to 310 deg.C Time : less than 15 seconds AuSn Perform Volume : per next Figure
500 Volume of Au-Sn Perform (10 -3/mm 3)
400
300
200
FMM5716X
100
0 0 1 2 3 4 5 Area of Chip Back Surface (mm^2)
WIRE BONDING The bonding equipment must be properly grounded. The following or equivalent equipment, tools, materials, and conditions are recommended. 1) Bonding Equipment and Bonding Tool. Bonding Equipment : West Bond Model 7400 (Manual Bonder) Bonding Tool : CCOD-1/16-S-437-60-F-2010-MP (Deweyl) 2) Bonding Wire Material : Hard or Half hard gold Diameter : 0.7 to 1.0 mil 3) Bonding Conditions Method : Thermal Compression Bonding with Ultrasonic Power Tool Force : 0.196 N +/- 0.0196 N Stage Temperature : 215 deg.C +/- 5 deg.C Tool Heater : None Ultrasonic Power Transmitter : West Bond Model 1400 Duration : 150 mS/Bond
8
FMM5716X
60GHz Low Noise Amplifier
Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Asia Pte. Ltd. Hong Kong Branch Suite 1906B, Tower 6, China Hong Kong City 33 Canton Road, Tsimshatsui, Kowloon Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc.
Sales Division
CAUTION
Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: *Do not put these products into the mouth. *Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these byproducts are dangerous to the human body if inhaled, ingested, or swallowed. *Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Inc. reserves the right to change products and specifications without notice.The information does not convey any license under rights of Eudyna Devices Inc. or others.
(c) 2005 Eudyna Devices USA Inc. Printed in U.S.A.
1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL +81-45-853-8156 FAX +81-45-853-8170
9


▲Up To Search▲   

 
Price & Availability of FMM5716X

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X